Ai Image Prompts

do this for history of gaming: <instructions>
role: act as a world class level visual artist and history buff. 

Input a: topic

instructions: draw a detailed photograph of an open antique book serving as a diorama for {argument name="topic" default="[input a]"} history with relevant elements (e.g. space model and small astronauts, space food) set against various {argument name="topic illustrations" default="[input a]"} illustrations and objects showing the history of {argument name="topic history" default="[input a]"}

Output: one image 
</instructions>

A 2x2 grid of 4 monumental mathematical symbols carved as colossal terrain typography in an arid landscape

 [Top Left: “∫” as a canyon-cut arch in sandstone, a thin aqueduct stream following the curve, tiny caravans casting long shadows] [Top Right: “Σ” as a stepped fortress carved into a mesa, sharp terraces, windblown sand pooling in corners, micro equations chiseled in] [Bottom Left: “π” as massive stone pylons connected by a lintel bridge, ruined blocks scattered like proof fragments] [Bottom Right: Penrose Triangle as impossible ruins half-buried, forced perspective illusion, harsh sunlight slicing edges] 

Aerial oblique shot, golden hour desert light, crisp dramatic shadows, photoreal erosion detail, minimal haze, swiss 2x2 grid composition.

<instructions>    Input Variable:   [INSERT TOPIC HERE] (e.g., History of Space Exploration)

  System Instruction:  
Generate a crowded, hyper-realistic   "Book Nook" Diorama  . Use the following logic to procedurally fill the scene with high-density detail:

  1. Semantic Analysis (The Loot Table):  
      The Totem:   Identify the single tallest, most vertical object representing the topic (e.g., Saturn V Rocket).
      The Ephemera:   Identify 4-5 small, specific consumer goods or artifacts (e.g., "Tang" Packet, Freeze-Dried Ice Cream, Mission Patches, Apollo 11 Manual).
      The Timeline:   Identify the key visual evolution steps (e.g., Sputnik -> Lunar Module -> Shuttle).

  2. The Immutable Container (The Corner Stage):  
      Geometry:   The book is NOT lying flat. It is standing upright, opened to form a   Strict 90-Degree Corner  .
         Vertical Wall:  The back cover/pages standing straight up.
         Horizontal Floor:  The front cover/pages lying flat.
      The Anchor:   The "Totem" object (Rocket) stands   inside the spine crease  , acting as the structural pillar holding the book open.
      Paper Texture:   The pages must look thick, rough, and heavily aged (like an 1800s manuscript).

  3. The Vertical Plane (The Da Vinci Sketchbook):  
      Density:     MAXIMUM.   Do not leave white space.
      Style:   Sepia-tone   Pen & Ink Technical Drawings  .
      Content:   The background should be a chaotic but organized collage of diagrams, timelines, and schematics. It should look like a scientist's field notes.
      Text:   A bold, formal Serif Title at the top (e.g., "{argument name="title" default="HISTORY OF SPACE EXPLORATION"}").

  4. The Horizontal Plane (The Physical Clutter):  
      Transition:   The Totem (Rocket) seamlessly transitions from a drawing on the wall to a   Physical 3D Model   on the floor.
      The Scatter:   The "Ephemera" props are   scattered and overlapping   on the floor page. They should not be neatly arranged.
         Material Contrast:  The props must look like shiny plastic, crinkled foil, and fabric patches. This clashes with the matte paper.
         Scale:  A tiny 1:64 scale human figure (e.g., Astronaut) stands next to the massive Totem for scale.

  5. Visual Syntax:  
      Background:     Void Black.   The book floats in infinite darkness.   DO NOT render studio equipment, lamps, or tables.  
      Lighting:   "Museum Display" lighting. A focused beam hits the Totem, creating a long shadow against the back page sketches.
      Depth:   The 3D objects must cast hard shadows onto the 2D paper to sell the optical illusion.

  Output:   1:1 Aspect Ratio, Macro Photography, High Textural Contrast (Paper vs. Plastic). </instructions>

{
  "subject": {
    "main_focus": "A gloved hand holding a brass drafting compass and a vintage fountain pen",
    "background_elements": [
      "Architectural blueprints of a house",
      "Mechanical gear schematics",
      "Cross-section technical drawings"
    ],
    "setting": "An aged, weathered parchment paper workbench"
  },
  "style": {
    "aesthetic": "Vintage industrial technical illustration",
    "art_medium": "Ink and wash on aged paper",
    "texture": "Grainy, sepia-toned, distressed paper with creases and coffee stains",
    "typography": {
      "text": "{argument name="title text" default="VINTAGE TECHNICAL ILLUSTRATION"}",
      "font_style": "Bold, serif, weathered woodblock style",
      "placement": "Top center"
    }
  },
  "composition": {
    "perspective": "Top-down close-up (macro)",
    "lighting": {
      "type": "Warm, cinematic spot lighting",
      "effects": "Floating embers and dust particles, glowing highlights on the metallic tools"
    },
    "color_palette": [
      "Sepia",
      "Burnt orange",
      "Charcoal grey",
      "Antique gold"
    ],
    "framing": "The hand enters from the bottom right, creating a diagonal focal point"
  },
  "technical_details": {
    "line_work": "Fine-liner precision, hatching and cross-hatching for shadows",
    "realism": "High detail on the leather glove texture and metallic sheen of the tools"
  }
}

Image-to-tech-drawing

Input A is an invention or technology
Analyze: how this innovation appeared independently or was transmitted across ancient civilizations (Egyptian, Chinese, Islamic, Mayan, Greek, etc.).
Goal: Miniature bridge structure connecting 3-5 civilization "islands."
Rules:
* Base: ancient world map (aged parchment) as foundation
* Bridge structure: ornate multi-level walkway with different architectural styles for each section (columns, arches, pagoda elements)
* Each "island" platform: distinct civilization's version of {argument name="invention" default="Input A invention"} (Chinese compass vs Viking sunstone, Mayan zero vs Indian zero, etc.)
* Civilization figurines: tiny scholars/inventors from each culture examining each other's versions
* Include: trade route markers, tiny ships/caravans between islands, scrolls being passed
* Center of bridge: the "universal truth" they all discovered (mathematical formula, physical principle) etched in neutral symbol
* Materials: stone textures, gold leaf accents, cultural pattern details
* Lighting: mystical golden hour with light ray connecting all islands
Output: 1 x image, 16:9 landscape for maximum bridge span visibility, mythological epic photography

You are an **architect and concept artist who visualizes story structures**.
Analyze the provided input text (the movie synopsis) and generate a **"Vertical Layered Diorama"** where the height direction represents the timeline.

The character in the attached reference image should be placed in the "Present (Middle Layer)" or "Future (Top Layer)" of this vertical structure, acting as the **storyteller/time traveler**, and posed to **look down on the past / look up at the future**.

---

## ▼ Instructions for Generation Process (Nano Banana Pro: Thinking Mode)

1. **[Step 1: Timeline Mapping]**: Decompose the synopsis into three time phases and assign them to physical layers.

   * **Bottom Layer (Past/Origin)**: Cause of gravity collapse, sealing, deep underground. Dark and heavy tone.
   * **Middle Layer (Present/Conflict)**: Survival and conflict in gravity-broken Tokyo. Vivid and dynamic tone.
   * **Top Layer (Future/Conclusion)**: Birth of a new gravity order, hope or ruin. Open and symbolic tone.
2. **[Step 2: Connection Design]**: Design the layers so they are not disconnected, but physically connected by elements such as **Gravity Well pillars / inverted spiral staircases / magnetic elevators / waterfalls where falling turns into rising**.
3. **[Step 3: Text Integration]**: Place the movie title in a stable location at the very top or bottom, and engrave famous lines on the **layer boundaries**.

---

## ▼ Design and Style Specification

* **Composition/Layout**: **Vertical Cross-section / Tower structure**. Aspect ratio is vertical (**9:16**). Viewpoint is **slightly above the front**, at an angle that shows the thickness and depth of the layers.
* **Taste**: **Precise museum model, geological cross-section, surreal architecture**. Express different eras and materials in each layer (concrete → neon metal → white structure on clouds) while integrating them as one giant object.
* **Texture/Image Quality**: Photorealistic, precise detail, **8k**. Raindrops, wet asphalt, reflections, fog, volumetric light.
* **Gravity Expression (Important)**:

  * Tokyo roads **curve 90 degrees as a continuous surface**, where the ground becomes a wall, and then arches to the ceiling, connecting in a **loop**.
  * Buildings, signs, cars, and pipes **protrude vertically** from the curved surface, and landmarks exist **upside down** suspended in the air.
  * Depict as a **physically continuous urban structure**, not just a reflection.
  * Light sources match the reality of a rainy night (reflections of neon and streetlights, diffused light through clouds).

---

## ▼ Input Text (Fictional Movie)

**Title**: **{argument name="Movie Title" default="GRAVITY BROKEN TOKYO (Gravity Fault City Tokyo)"}**
**Genre**: Sci-Fi Thriller / Disaster / Human Drama

**Synopsis**:
One night, due to the fracture of the "Gravity Lattice" above Tokyo, the city's gravity lost its uniformity. Roads bend into the sky, buildings lose their up and down, and falling chooses a direction. People survive by redefining "where the ground is." The narrator (reference character) dives across time to the origin of the gravity collapse, struggles in the current city, and reaches the new order of the future.

### [Bottom Layer / Past and Origin] (PHASE 1: YEAR 2036)

* **Setting**: Deep underground research complex. Black basalt-like strata, old wiring, gravity control reactor "Atlas Core."
* **Description**: Suggests that the device meant to "fix" gravity instead triggered the "tearing" of gravity. Tools and paper documents are scattered on the floor, and water droplets float horizontally due to gravity disturbances.
* **Tone**: Dark, oppressive. Warning lights, fine dust, the stillness of low gravity.

### [Middle Layer / Present and Conflict] (PHASE 2: YEAR 2046)

* **Setting**: The center of gravity-broken Tokyo, where rain continues to fall. A continuous city where **wet asphalt curves 90 degrees, becoming a wall, and continuing to the ceiling**.
* **Description (Reflecting Gravity Prompt)**:

  * Roads rise vertically and then arch overhead to loop.
  * Landmarks are suspended upside down, and road signs protrude into the air.
  * Neon lights bleed along the curved surfaces in the fog and light rain, and reflections establish the light of a real rainy night.
* **Character Placement**: Place the reference character in the **"Present" of the Middle Layer**. Grasping a railing or pipe with one hand, pointing to the light of the upper layer with the other. Gaze **looking down on the past (bottom layer) while looking up at the future (top layer)**.
* **Tone**: Dynamic, tense. People's evacuation routes continue along the "wall roads."

### [Top Layer / Future and Conclusion] (PHASE 3: YEAR 2058)

* **Setting**: The "Stable Gravity Layer" above the clouds. City remnants are rearranged, forming a new residential area composed of white frame structures and transparent materials.
* **Description**: Ambiguous whether the gravity lattice was "repaired" or if a "new direction" was accepted. A pale column of light from the gravity well extends into the sky, connecting to the darkness below.
* **Tone**: Open and symbolic. Hope and unease coexist.

---

## ▼ Connection Points (Gimmicks connecting the layers: Required)

* **Gravity Well Light Column**: A column of pale blue volumetric light penetrating from the core of the bottom layer to the top layer. Particles flow upward.
* **Inverted Spiral Staircase**: "Up" and "down" switch midway. Small year plates on the staircase railing.
* **Waterfall where Falling Turns into Rising**: The water flow reverses at the boundary, emphasizing the layer separation.

---

## ▼ Visual Elements (Motifs to emphasize)

* Wet asphalt, trajectory of raindrops, neon reflections, fog, volumetric light.
* Curved City: Roads, architecture, and signs bend as a **continuous surface**, forming a **physical loop**.
* Small objects floating in the air (umbrellas, paper scraps, tools, petals) visualize the disturbance in the direction of gravity.
* Material changes in each layer: Rough rock stratum underground → Wet concrete and metal in the present → White structure and transparent material in the future.

---

## ▼ Text Instructions (On-screen Typography)

* **Title**: "**{argument name="Title" default="GRAVITY BROKEN TOKYO"}**"

  * Placement: **Sky of the Top Layer**, or engraved on the pedestal of the bottom layer.
  * Font: Inorganic sans-serif, movie poster style.
* **Famous Line** (Engrave on layer boundaries):

  * `{argument name="Famous Line" default=""Where is down, when the world forgets gravity?""}`
  * Placement: **Boundary between Middle and Top Layers**, like a sculpture on the landing of the inverted staircase or the edge of the light column.
* **Timeline Display (Optional)**: Small next to each layer

  * `PHASE 1 / YEAR 2036`
  * `PHASE 2 / YEAR 2046`
  * `PHAS

Create a home-style cooking step infographic for 【{argument name="dish name" default="Sweet and Sour Pork"}】.

【Overall Style】
- Style: 8K ultra-HD realistic photography style, professional quality suitable for a food magazine
- Image Quality: 8K resolution, sharp details, professional food photography lighting
- Background: Real kitchen scene/marble countertop/wooden cutting board, shallow depth of field blur
- Color Palette: Natural and realistic colors, true colors of ingredients, warm lighting
- Layout: Horizontal 16:9

【Top Title Area】
- Main dish title (elegant Chinese font)
- Subtitle: Cooking time / Difficulty level / Serving size
- Background can use a blurred close-up of the finished dish

【Left or Top - Ingredient List Area】
- Title: "Ingredient Preparation"
- All ingredients arranged realistically, neatly organized from a top-down view (flat lay)
- Each ingredient labeled with name and quantity
- Style: Instagram-style ingredient flat lay photography

【Main Body - Cooking Steps Area】
- 6-8 steps, arranged in a grid or timeline
- Each step includes:
  * Step number (simple numeric identifier)
  * Close-up photo of the actual cooking process:
    - Cutting meat: Knife skills details, meat texture
    - Blanching: Boiling water, foam
    - Caramelizing sugar: Caramel color, oily sheen
    - Stir-frying: Dynamic movement in the wok, flame
    - Stewing/Simmering: Sauce bubbling, steam rising
    - Reducing sauce: Thick sauce, glossy meat pieces
  * Brief descriptive text (1-2 sentences)
  * Heat/Time notation

【Bottom - Finished Dish Display Area】
- 8K high-definition photo of the finished dish
- Professional plating, exquisite tableware
- Shot at a 45-degree angle or top-down view
- Visible food texture: Gloss of the sauce, fibers of the meat, rising steam
- Background: Dining table setting, chopsticks, small side dishes for garnish

【Photography Specifications】
- Lighting: Side-back light/natural window light, creating appetite appeal
- Depth of Field: Subject sharp, background naturally blurred
- Texture: Visible ingredient texture, oil sheen, reflection of the sauce
- Steam: Real steam visible in hot dish steps
- Color Temperature: Warm tone (5500-6000K), enhancing appetite

【Auxiliary Elements】
- Tips notation: Key techniques (e.g., "Blanch in cold water to remove odor," "Simmer slowly for 40 minutes")
- Heat icon: 🔥 notation for heat level in each step
- Timer notation: Duration for key steps
- All ingredient quantities, step details, time, and heat should be automatically generated accurately based on the dish

A detailed diorama on a long wooden desk showing a timeline of failed inventions from 4 different areas: {argument name="first invention date" default="300 BC"}: failed invention with a tag explaining in a couple of words why {argument name="second invention date" default="1400 AD"}: failed invention with a tag explaining in a couple of words why {argument name="third invention date" default="1700 AD"}: failed invention with a tag explaining in a couple of words why {argument name="fourth invention date" default="1900 AD"}: failed invention with a tag explaining in a couple of words why steampunk aesthetic, cluttered with scrolls, blueprints, gears, warm, workshop, lighting.

A clean, top-to-bottom exploded breakdown of the uploaded image, showing all components separated and aligned vertically, against a pure white background, minimal shadows, studio lighting, high detail, photorealistic, 8k, product photography, {argument name="product type" default="watch"}

{
  "meta": {
    "aspect_ratio": "3:2",
    "quality": "ultra_photorealistic",
    "resolution": "8k",
    "style": "scientific macro documentary photography",
    "realism_level": "extreme realism, natural optics",
    "ai_artifacts": "none"
  },

  "subject": {
    "description": "a single water droplet resting on a rainforest leaf",
    "droplet": {
      "shape": "natural spherical tension",
      "clarity": "crystal clear",
      "refraction": "subtle optical refraction of leaf veins inside the droplet"
    },
    "leaf": {
      "type": "{argument name="leaf type" default="broad tropical rainforest leaf"}",
      "surface": "slightly waxy, natural micro texture",
      "veins": "highly detailed visible leaf veins branching naturally",
      "imperfections": [
        "tiny surface pores",
        "microscopic dust",
        "organic irregularities"
      ]
    }
  },

  "environment": {
    "location": "dense tropical rainforest",
    "atmosphere": "humid, quiet, post-rain stillness",
    "background": [
      "soft green bokeh",
      "out-of-focus jungle foliage",
      "natural depth layers"
    ],
    "air": "moist, slightly misty"
  },

  "lighting": {
    "type": "natural diffused rainforest light",
    "source": "filtered sunlight through canopy",
    "quality": "soft, scattered, non-directional",
    "highlights": "gentle specular highlight on water droplet",
    "shadows": "extremely soft micro-shadows along leaf veins"
  },

  "camera": {
    "camera_type": "professional macro photography setup",
    "lens": "100mm macro lens",
    "aperture": "f/8",
    "focus": "razor-sharp focus on leaf veins and water droplet edge",
    "depth_of_field": "very shallow, true macro depth",
    "magnification": "1:1 macro ratio",
    "perspective": "parallel to leaf surface"
  },

  "color_grading": {
    "palette": "deep natural greens, subtle yellow highlights",
    "saturation": "realistic, not boosted",
    "contrast": "low to medium, natural tonal range",
    "clarity": "optical clarity, not digital sharpening",
    "grain": "none or extremely subtle"
  },

  "constraints": [
    "no insects",
    "no fantasy glow",
    "no artificial lighting",
    "no cinematic color grading",
    "no exaggerated sharpness",
    "must look like a real scientific macro photograph"
  ]
}

Exploded view of the same taco, presented in a clean and professional style resembling commercial recipe cards. It consists of only five components, matching the first image, separated from each other and arranged vertically from top to bottom, with equal spacing and perfect alignment.
Component arrangement (Top → Bottom):
Fresh tomato sauce — {argument name="tomato sauce weight" default="30 g"}

Grated cheddar cheese — {argument name="cheddar cheese weight" default="40 g"}

Grilled chicken pieces — {argument name="grilled chicken weight" default="70 g"}

Crispy lettuce — 35 g

Soft wheat taco bread — 40 g

Add infographic-style annotations to each component. Each annotation contains the component name and its exact weight in grams, written exactly as mentioned above.

Annotation design guidelines:
Sans-serif bold font

Text inside simple frames or boxes
Thin, precise lines connecting the annotation directly to each component

High clarity without overlap or excessive decorative elements

Organized vertical layout, resembling a modern recipe card

The background is light and neutral, prepared for text clarity and visual cleanliness. The overall style is simple, educational, and commercial, suitable for marketing work, visual explanations, and product analysis.